Pro tip: I quit sanding past 150 grit on painted maple doors and my finish guy never said a word
For about 6 years I sanded every door and face frame up to 220, sometimes 320 if I was feeling fussy, because that's what the old guy who trained me in Rochester did and I never questioned it. Then two winters ago I got buried in a 34 door kitchen job and said to hell with it, stopped at 150 on anything getting paint, and guess what, the primer grabbed better and the topcoat laid out just as flat. Turns out all that fine sanding was burnishing the wood and my finish guy told me straight up he could not tell the difference on a painted surface, and honestly the 220 was just eating my time and my paper budget. Now I only go past 150 on stain grade, period, no exceptions, and I've shaved maybe 4 hours a week off my builds. The one thing I will say is you have to keep your drum sander marks out before you hit 150 or it shows through, so it's not a free pass to be sloppy. Anybody else stop at a coarser grit than they were taught, or am I the only one who took this long to figure it out?